创新|开发|定制
专注于软路由|网络技术领域

CAPsMAN设置脚本及教程

#命令行配置AC

 /interface bridge add name=APbridge
 /interface bridge port add interface=cap1 bridge=APbridge
 /ip address add interface=APbridge address=10.10.0.1/24
 /ip pool add name=APDHCP ranges=10.10.0.2-10.10.0.254
 /ip dhcp-server add name=APDHCP interface=APbridge address-pool=APDHCP lease-time=1d disabled=no
 /ip dhcp-server network add address=10.10.0.0/24 gateway=10.10.0.1
 /caps-man channel add name=channel1 band=2ghz-b/g/n width=20
 /caps-man configuration add name=cfg1 mode=ap ssid=FREE-WIFI max-sta-count=60 channel=channel1
 /caps-man provisioning add action=create-enabled master-configuration=cfg1
 /caps-man manager set enabled=yes

命令行配置AP(以下拿RB951-2n为例)

/interface bridge add name=bridge protocol-mode=rstp

#接口根据你的设备做删减

 /interface bridge port add interface=ether1 bridge=bridge
 /interface bridge port add interface=ether2 bridge=bridge
 /interface bridge port add interface=ether3 bridge=bridge
 /interface bridge port add interface=ether4 bridge=bridge
 /interface bridge port add interface=ether5 bridge=bridge
 /interface enable wlan1
 /interface bridge port add interface=wlan1 bridge=bridge
 interface wireless cap set enabled=yes interfaces=wlan1 discovery-interfaces=bridge bridge=bridge

#可选是否分配IP地址

/ip address add address=192.168.1.2/24 interface=bridge

#设置时间时区

 /system clock set time=00:00:00
 /system clock set time-zone-name=Asia/Chongqing
 /system ntp client set primary-ntp=time.windows.com secondary-ntp=time.windows.com
 /system ntp client set enabled=yes

#设置设备名称便于区分是那台AP

/system identity set name=AP1

#设置定时重启

/system scheduler add name=reboot start-time=00:00:00 interval=30d on-event=”/system reboot

​#设置AP密码

/user set admin password=www.ros5.com
赞(0) 打赏
转载请注明出处:Ros资源网 » CAPsMAN设置脚本及教程

评论 抢沙发

评论前必须登录!

 

觉得文章有用就打赏一下文章作者

支付宝扫一扫打赏

微信扫一扫打赏